Solid wood furniture is mainly divided into traditional and modern. Traditional hardwood furniture generally has no lacquer on the surface, just hot wax. Newly produced hardwood or other solid wood furniture is now protected by a large lacquer or varnish. Different methods of maintaining solid wood furniture are different.
1. The solid wood contains water. When the air humidity is too low, the hardwood furniture will shrink, and when it is too high, it will swell. Generally, solid wood furniture has a shrinking layer when it is produced, but it should be noted when using it. Do not place it in a place that is too humid or too dry, such as near a hot and hot place such as a stove heater, or a place that is too humid in the basement to avoid Mildew or chapped.
2, solid wood furniture sticks to oil, residual tea is an excellent cleaning agent, after wiping, spray a small amount of corn flour for wiping, and finally wipe the corn flour. Corn flour absorbs all the dirt adsorbed on the furniture surface, making the paint surface smooth and bright.
3. If the surface of solid wood furniture is white wood lacquer, it will easily turn yellow over a long period of time. Use a rag to wipe the toothpaste. Be careful not to use excessive force. You can also mix the two egg yolks and apply them with a soft brush to the yellow area. After drying, carefully wipe them off with a soft cloth.
4, the furniture surface to avoid placing too heavy items for a long time, otherwise it will deform the furniture. Even on solid wood tables, it is not advisable to place materials such as plastic sheets on the table.
5, the furniture surface should avoid rubbing with hard objects, so as not to damage the paint surface and the surface texture of the wood. For example, when placing decorative items such as porcelain bronzes, be careful. It is best to pad a soft cloth.
6, the room is not flat, the length of time will lead to furniture deformation, the way to avoid is to use a small piece of wood to level. If it is a bungalow or a low-rise house, the floor should be properly padded if it is wet, otherwise the legs will be easily corroded by moisture.
7. Never wipe the solid wood furniture with a wet rag or a rough rag. Use a clean soft cotton cloth, add a little furniture wax or walnut oil after a while, and gently rub back and forth along the wood grain.
8. Avoid placing the furniture in front of the large glass window facing south. The long-term direct sunlight will make the furniture too dry and fade. Hot water cups, etc. cannot be placed directly on the surface of the furniture, leaving traces. Color liquids, such as ink, should never be spilled on the table.
If the solid wood furniture is not noticed, it will slowly climb up the wrinkles. What is going on? How to fix it? Look at the small series to teach you.
Keep the moisture away from the furniture
How to maintain solid wood furniture: Do not store solid wood furniture in a room that is too humid, which will make the furniture become upset due to moisture, which will affect the appearance and shorten the service life.
To prevent this from happening, you must keep the room dry. In the wet summer, you'd better use a thin glue to separate the furniture from the ground, while keeping the wall of the furniture at a distance of 0.5-1 cm from the wall, the problem is solved.
Solid wood furniture does not love sunshine
How to maintain solid wood furniture: animals and plants need to get the warmth of the sun, does solid wood furniture also need to enjoy the sun? Don't think so, the sun will erode the solid wood furniture, solid wood furniture should be placed in a place that is not exposed to sunlight, to avoid long-term exposure of furniture. If the furniture needs to be placed next to the window, it can be fitted with curtains that block the UV rays.
Wipe the furniture to choose the light wax
How to maintain solid wood furniture: Furniture should be wiped frequently, but you should be reminded that when wiping furniture, do not use solvents containing alcohol or gasoline to wipe the stains, which will corrode the furniture. It is best to use wood-colored wooden furniture light wax, spread thinly on the surface of the finish, and then wipe dry with cotton cloth. This can reduce dust and increase gloss.
Keep distance from heat source
How to maintain solid wood furniture: solid wood furniture does not like too hot. When choosing the location, avoid contact with hot heat sources such as heating, otherwise the furniture will be hot and cracked, which will affect the appearance.
If it needs to be placed close to the heating, some heat-resistant substances can be used to separate it from the furniture to avoid damage.
Keep it bright and have a coup
How to maintain solid wood furniture: Mix the neutral soap with silky warm water (about 1:20) and wipe the surface of the solid wood furniture. Wipe with a damp cloth and dry the surface with a dry cloth to reduce the adhesion of stains on the surface of wooden furniture and keep the furniture bright.
Warm and wet balance
How to maintain solid wood furniture: Many homes now have air conditioners installed, which makes the indoor air humidity, temperature and outdoor have many differences. Some furniture will crack, this is due to the loss of moisture in the solid wood, the temperature difference between indoor and outdoor is too large, the expansion and contraction of the wood is too large, and the wood ribs inside are broken due to too dry.
So keep the solid wood home with a certain amount of moisture and keep the humidity inside the air.
Solid wood furniture repair method
How to maintain solid wood furniture: If the maintenance is not appropriate, the furniture will appear unsightly cracks and scars, affecting the appearance. Keep on, don't look good; throw it, it's a pity.
At this time, it is necessary to make some repairs to the furniture that has already had problems, so that it can return to the original style. Depending on the problem, the repair method is different, you can choose the appropriate repair method according to the problems that arise in your own furniture.
Poor color hot mark
How to maintain solid wood furniture: People sometimes don't pay attention to it. They often put the bowl with hot soup or the cup filled with boiling water directly on the painted solid wood furniture, so that the furniture will have unsightly color burn marks. Don't worry, in this case, you can use a fine cloth to sip a little tea or toilet water and gently wipe it so that the hot marks can be greatly improved.
Fine scratches on the surface
How to maintain solid wood furniture: At home, there are some bumps and bumps. If you have a baby at home, when you don't pay attention, he may put a trace on your favorite furniture, and even cause the paint film to fall off. Regret or blame the child has nothing to do, the important thing is to repair: you can use the color pen to repair the color of the furniture, and then the surface is coated with a layer of colorless and transparent nail polish, which can have a good effect.
Cracks and holes in the table, chair and counter
How to maintain solid wood furniture: When the furniture is used for a long time, cracks and holes will inevitably occur. At this time, just look for some useless old books, cut it into crumbs, then add the right amount of alum, boil it with water, and embed it in the seam. It will be very firm after drying. It is also possible to use white glue to evenly adjust the wood chips, embed them in cracks, and polish them with sandpaper after a night, which is simple and economical.
Xiao Bian summary: How to maintain solid wood furniture, in fact, is not a problem, it depends on whether you have mastered these tricks to teach you, know how to maintain solid wood furniture, create a beautiful home!
Color Sticker,Colored Stickers,Multicolor Stickers,Colored Label Stickers
Guang Zhou SUNSEA Printing Technology CO.,LTD. , https://www.sansenprinting.com