Wardrobe maintenance common sense longevity trick

[ Chinese wardrobe net ] We treat the wardrobe as a maintenance, we can think that the wardrobe is the same as the woman, it also needs maintenance. Especially in spring, the weather is damp and the wind is dusty. If there is stain on the surface of the wardrobe, you can use a damp cloth to take a proper amount of neutral detergent or soapy water. Avoid using corrosive detergents, hot water, alkaline water or disinfection. Water, etc., otherwise it will damage the gloss of the wardrobe surface. Xiaobian gives you a detailed introduction to the daily maintenance knowledge of the wardrobe, helping it to keep the light as new.

Avoid using irritating and corrosive chemicals such as alcohol and detergents that are easily damaged by wood.

Wooden wardrobes can be wiped with a clean rag, but if it is dirty, use soap or a neutral detergent and wipe it with a damp cloth.

Ultraviolet light is also destructive to wood furniture, so proper use of fabrics or curtains to avoid sun exposure is necessary.

If you want to wax, it is best to choose a wax with a high concentration and solid, free of silicon, so as not to damage the paint surface.

Improper paint treatment causes deformation of panel furniture parts

Component stacking causes deformation in production, some operators are convenient for drawing, stacking the plates freely, or stacking the plates is not flat, and even leaning the plate against the wall, causing the plates to enter Before the next process, it was deformed due to its own weight. The coating process causes deformation During the finishing process, due to improper use of the process and raw materials, the plate is deformed and deformed as the internal stress of the coating changes. The effect of finishing putty In the decoration of the door parts, many manufacturers use pig blood putty or glue to prepare the putty in order to reduce the cost. Because these two kinds of putty contain a lot of water, the substrate commonly used for plate furniture - medium density Fibreboard and particleboard are particularly hygroscopic, so when one side of the door panel is not putty, and the other side is coated with such a water-rich putty, the door panel part is hygroscopic and deformed.

The influence of the drying process is in the production. When the board is coated with putty or paint, it should be placed on the drying rack for natural drying. If the rod of the drying rack is too sparse or uneven, it will also cause the door. The part was found to be bent and deformed during the drying of the paint. The influence of the internal stress of the coating will form a certain coating after curing. Even if there is no external force, an internal stress will be generated. If the internal stress is not handled properly, it will become the main cause of bending deformation of the door component. one.

In fact, the use of the wardrobe is still a lot of functions, if you do not do a good phone call in daily maintenance work, it will greatly reduce the life of the wardrobe, learn these tips, go home and treat your wardrobe.

Door Hardware

Door Hardware for Interior and Exterior Doors:Door plate handles,Door lever handles,Door Hinges,Door Stopper, lockbody,Cylinder,etc.

Finishe color: Bright Brass,Satin Brass,Antique Brass. Bright Chrome,Satin Chrome,Polished Nichkel,Satin Nickel,Matte Black,etc.


Door Hardware,Sliding Closet Door Hardware,Door Knobs,Closet Door Hardware

JESSO HARDWARE , https://www.china-jesso.com

Posted on