GMP requirements for equipment In addition to the design of the equipment should meet the requirements of the production process, the most important principle is that the equipment should be able to prevent cross-contamination, the equipment itself does not affect the quality of the product, and is easy to clean and maintain, the design and layout of the equipment can produce The risk of errors is reduced to a minimum.
1. The production equipment should be compatible with the adopted technology and the products produced. The performance technical indicators of the equipment meet the design standards. After the new equipment is installed, the test and necessary verification should be carried out.
2. The equipment should be placed in the clean room with sufficient space and not crowded. It is not easy to cause errors due to unreasonable placement of the equipment and is not conducive to cleaning and maintenance.
3. Equipment for the production of sterile preparations such as large infusion, injection, freeze-dried injection and other potting equipment preferably have a laminar flow purification device, which is easy to meet the cleanliness requirements and can avoid the pollution of microorganisms and dust particles to the greatest extent. The disposal of dust and the prevention of cross-contamination in the production process of tablets, capsules, granules, etc. in solid preparations are very prominent and difficult problems, except for using closed operating systems as much as possible, such as crushing, weighing, mixing, and Granulation production equipment such as sieving, drying, and granulation should be designed with reasonable dust filter system to overcome cross-contamination and minimize investment and operating costs.
4. Another important measure to prevent cross-contamination is that the equipment should be easy to clean and some parts can be disassembled. Cleaning of equipment is one of the important regulations for all GMP. Equipment cleaning should include cleaning procedures including cleaning methods, cleaning agents, disinfectants, inspections after cleaning, cleaning cycles, etc. For the containers used in production, they should be cleaned immediately after use. Cleaning procedures should also be established. The cleaning of the equipment should be recorded.
5. The direct contact between the equipment and the processed product and the surface of the equipment should not react chemically, synthesize or adsorb with the product.
6. The equipment should not cause product contamination due to leakage of the sealing sleeve and leakage of lubricating oil.
7. The equipment after washing should be placed in a clean and dry environment. Check whether it has met the requirements of cleanliness before use.
8. The scope and precision of instruments, meters, gauges, scales, etc. used for production and inspection shall be stipulated, regularly corrected and recorded.
9. All equipment has a use and cleaning status label.
10. Equipment that is unqualified or not used is not placed in the production area.
11. The equipment should have equipment files and maintenance records. If there is equipment verification, there should be verification records.
Product details
With Pet All Star Waste Bags, picking up after your furry friend just got a lot easier. Each package contains a total of 120 bright blue-colored bags in eight separate rolls. Each roll is conveniently sized to fit inside standard poop bag dispensers, ensuring that you have plenty on hand, no matter where your walk takes you and your pooch. The bags are large enough to accommodate waste from dogs of all sizes, and their durability will give you confidence that your pup's poop is safely contained while you prowl for a place to properly dispose of it. Keep the messes at bay with Pet All Star Waste Bags!
Pet waste bags
8 rolls per package
Fits most dispensers
120ct
Flat Bags,Hdpe Doggie Poop Bag,Hdpe Pick Up Poop Bag,Hdpe Clean Up Pet Bags
Taizhou Jinchi Sanitary Product Co., Ltd , https://www.petwastebagtzjc.com