[ Chinese wardrobe net ] In the home decoration, more and more consumers choose to move the wardrobe , the wardrobe is an important part of our life, so you need to be cautious when buying the wardrobe sliding door, then what should you pay attention to when buying the wardrobe sliding door? Here is a detailed introduction to the wardrobe sliding door purchase related knowledge.
Wardrobe sliding door purchase precautions
Purchase Note 1: Profile
There are two types of profiled substrates that are practical for sliding doors: one is aluminum alloy and the other is plastic steel. Due to its light weight and high strength, aluminum alloy is a high-grade material for sliding door substrates. Has gradually replaced plastic steel products. The aluminum alloy itself is divided into ordinary aluminum-magnesium alloy and smaller aluminum-magnesium alloy for special aviation. Because aluminum-magnesium-titanium-silicon alloy has higher strength and smaller weight. Therefore, it is favored by consumers, but the cost is several times that of ordinary aluminum-magnesium alloy. When looking at the profile, not only pay attention to the substrate, but also observe its surface treatment. Advanced surface treatments include anodizing, electrophoretic coating carbon coating, etc. These processes have higher hardness and aesthetics than simple spraying and plating.
Purchase Note 2: Top and bottom rails
When purchasing the sliding door, try to choose the top and bottom rails with the same material as the sliding door material, because the top bottom rail is the load-bearing part. To withstand repeated friction, the top and bottom rails must have high strength and wear resistance, and the color of the top and bottom rails is basically the same as the color of the frame.
Purchase Note 3: Pulley
The pulley is an important part of the sliding door. It is necessary to pay attention to the selection of high-quality bearing pulley. The best pulley is made of high carbon nylon and glass fiber. The pulley has the characteristics of high strength, wear resistance and low noise. More than 100,000 pushes and pulls.
Purchase Note 4: Strip
The main materials popular in the market are PVC rubber, silica gel and the like. The silica gel strip is made of a non-toxic, non-corrosive silicone material. Good toughness can also be maintained at ultra-low temperatures.
Purchase Note 5: Plate, substrate
Commonly used in cabinet plates are blockboard, MDF, and moisture-proof particleboard. Among them, the most cost-effective is the moisture-proof particle board, which has the advantages of light weight, high strength, strong nail holding power, etc. It is generally an ideal cabinet board, but the moisture-proof particle board also has different qualities, so consumers must consider when customizing the cabinet. His quality and environmental protection.
Purchase Note 6: glue, edge banding, veneer
The edge banding mainly seals the section of the sheet. Achieve damage to the board from environmental or unfavourable factors in use (mainly moisture). Also achieve decorative effects. Ordinary glue has a pungent odor due to the presence of formaldehyde, and there is a risk of carcinogenicity. Therefore, when purchasing, pay attention to whether the cabinet has any odor.
Cleaning tips for wardrobe sliding doors
1. Regularly clean the surface of the sliding door with a soft cloth dampened with water or a neutral detergent. Do not use ordinary soap and washing powder, or use a strong acid-base cleaner such as decontamination powder or toilet cleaner.
2, sandpaper, wire brush or other abrasives are not allowed for scouring. After cleaning, wash with clean water, especially in places with cracks and dirt. Also use a soft cloth dampened with alcohol to scrub.
3. If the main material of the sliding door is made of sheet material, the moisture of the wet cloth used in cleaning should not be too much, as long as it is moisturized.
4. Regularly clean the sliding rail slots to keep the sliding door open and close smoothly.
Wardrobe sliding door maintenance skills
1. Maintenance of the pulley. The pulley is the soul of the entire inner door, and its size is small and plays a significant role. One or two drops of lubricant every six months or so can keep it smooth. The pulleys of the sliding door are divided into upper and lower wheels. The brand sliding doors on the market are as follows: “Fulu†and “Gold†move the upper and lower wheels of the sliding door with sliding needle bearings, no need to add lubricating oil, just pay attention to cleaning debris. If it is a general brand or a brand name and the pulley is a general bearing or rubber wheel, it is necessary to add lubricant to the sliding part every six months.
2. Protection of the track. Keep the track clean and prevent foreign matter from entering. If there are debris and dust, use a brush to clean it. The dust in the tank and the door can be sucked out by a vacuum cleaner.
3. Protection of sliding doors. Prevent gravity from hitting the door. It is forbidden to damage the sliding door and track by sharps or gravity, causing obstacles. If the door or frame is damaged, please contact the manufacturer or ask a professional maintenance worker to repair it.
4. Maintain good operating performance of the sliding door. The sliding door seems simple, but the structure and accessories are still more. The protection of the track and other aspects is very important. The sealing top and the glass seal are the key structures to ensure the sealing, heat preservation and sound insulation of the sliding door. If it falls off, it should be repaired in time. , replacement, in order to achieve the best effect of dust, anti-collision, sound insulation, insulation.
The above is for everyone to share the wardrobe sliding door purchase precautions, as well as the wardrobe sliding door maintenance knowledge, I hope to be helpful to everyone.
Infrared Temperature Measurement Module
For different application scenarios of fast and accurate body temperature screening, Zecheng Intelligent Technology has launched infrared thermal imaging Temperature Measurement Module equipment, which can be widely used in face temperature measurement all-in-one machine, Android Face Recognition device temperature measurement, and intelligent infrared body temperature screen. We provide complete technical support for them, break through existing technical thresholds, and help integrators create high-end, high-precision, large field of view, long-distance Temperature measurement products in order to compete for the rapid and accurate temperature measurement market at home and abroad.
High-precision infrared temperature measurement module, Infrared Temperature measurement Camera, Infrared array temperature measurement module
Guangdong Zecheng Intelligent Technology Co., Ltd , https://www.zecheng-security.com