In everyone's restaurant, there will be tables and chairs for special dining. In many people's homes, I don't know when I like the chair with the backrest. I don't feel like it at home. The rise of solid wood chairs, people rushing to buy, making the proportion of solid wood chairs in the market is growing, it is also a good thing. Then everyone will follow the small series to see the wonderful content of the solid wood chair .
First, how to solidify the solid wood chair
1. Prepare the chair repair tool
General material tools for repairing solid wood chairs: plastic bottles (used when knocking on wood surfaces), wool brushes, bicycle inner tubes, abrasive cloth, white glue, rags, secondary primers, varnishes, banana water, etc.
2. Initial inspection, preliminary inspection found that the chair jammed off or the surface was damaged.
3. Apply two kinds of white and white glue to the protruding part of the cassette, and then put the card which has been glued back to the original position. If necessary, use the plastic bottle to help replace it.
4. Reinstall the part of the chair that has fallen off with the hammer into the original position.
5. Then use the inner tube to tie the whole chair back and forth according to the tight position, then use the glue to tighten the adhesive part, and finally wipe the excess white glue with a damp cloth, so that the chair will not loosen and shake.
Second, the solid wood chair assembly tips
1. When assembling solid wood chairs, it should be judged according to the different types of wooden furniture. Some wooden furniture will use the square connection, or use the gum connection at the wood connection, that is, two small rounds as the joint point, then use white glue to increase the resistance, and some will add a screw in the middle of the two gums. When assembling, it can be processed according to different hoes.
2. Adding screws can save the glue process. Special reminder: When repairing or reassembling wooden furniture, you can add a little white glue to each joint and put it on it for 24 hours before using it. This will extend the service life of wooden furniture.
Third, the small common sense about emery cloth
1. The function of the abrasive cloth is similar to that of the sandpaper. Because the pulling operation of the wooden furniture is inevitable, the abrasive cloth is often used, so that the furniture can be prevented from being worn and worn. When choosing an emery cloth, you can fold the emery cloth in half and then tap it. If a lot of black small particles will fall out, this is a poor quality abrasive cloth.
2. The more numbering of the abrasive cloth, the more detailed the number, the smaller the number, the thicker the particles. Generally, the number of the household can be selected from 150 and 400, and the surface of the furniture will not be excessively worn due to exertion.
How about, I saw the wonderful introduction to the solid wood chair above. Did you understand the contents of many solid wood chairs? I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.
More related wonderful reading:
Children's study table solid wood chair to buy children's study table notes
Copier Toner For Xerox,Compatible Printer Cartridge,Colorful Compatible Toner Cartridge,Custom Xerox Toner Cartridge
jiangmen jinheng office equipment Co. Ltd. , https://www.jhtonercartridge.com