The FA-LS-20A Halogen Rapid Moisture Analyzer is a new type of rapid moisture detector. Its ring-shaped halogen heater ensures that the sample is evenly heated during the high temperature test, making the sample surface less susceptible to damage, rapid drying, and drying process. In the middle, the moisture meter continuously measures and instantly displays the % moisture content lost by the sample. After the drying process is completed, the final measured moisture content value is displayed. Compared with the international oven heating method, the test results have good consistency, are replaceable, and the detection efficiency is much higher than the oven method. The general sample takes only a few 4-5 minutes to complete the assay. The instrument is simple in operation, accurate in testing, and the display part adopts a large-screen touch display screen, and the display value is clearly visible, and the water value, the initial value of the sample, the final value, the measurement time, the initial temperature value, the final temperature value, and the like can be respectively displayed, and Has the ability to connect to a computer, printer. The moisture meter is widely used in all industries that need to quickly measure moisture, such as medicine, food, feed, seeds, dehydrated vegetables, tobacco, chemicals, tea, food, meat, agriculture, forestry, paper, rubber, plastics, textiles and other industries. , intermediates, samples of moisture content in finished samples and data printing.
Panel schematic:
Icon function description:
show result:
The moisture meter can display 9 moisture parameters during or after the test:
a. sample weight g;
b. dry weight g;
c. heating time (min; sec);
d. drying temperature;
e. End method;
f. water loss rate (ie water content) = (Gg) / G;
g. Drying rate = g/G
h. moisture regain (Gg) / g;
i. wet weight ratio = G / g;
Dry record:
a. Up to six sets of dried sample result parameters can be saved.
b. Touch the save button to save it in the dry record by the corresponding number.
c. Click on the dry record of the main interface to view the dried sample results parameters.
d. If the six sets of parameters are full, the newly saved parameters replace their first ones. If one of them is deleted, the latest one replaces its position.
The
stationery set can be divided into Oxford cloth,Plush and PU according to the material. It
can be designed with digital printing, silk-screen printing, UV printing and
other printing methods and accessories. It is a combination of practicality and
aesthetic culture.
Stationery Set,PU Stationery Set,Plush Stationery Set,Oxford Stationery Set,Custom Stationery Set.
Jilin Y.F. Import & Export Co.,Ltd , https://www.jlpencilcase.com