Wall cloth is a kind of decorative material that we like to choose when we decorate the wall. Another important question is that we really want to know, that is, how to paste the wall cloth, since everyone is on the wall cloth. How to paste is not very understanding, then the decoration of the small series, for everyone to introduce, how to paste the wall cloth , I hope that after reading the introduction, you will understand how the wall cloth is posted.
First, how to paste the wall cloth?
1. When affixing a wall covering, the first thing we need to do is to prepare tools, including glue, brush, towel, sponge, sandpaper, knife, scraper, tape measure, plastic container, etc.
2, then the thing to do is the wall treatment, use the scraper to scrape the wall impurities, floating soil, the cracks in the cavity are smoothed with gypsum powder, if the wall texture is soft or powder layer and swept over the latex paint First, you should first brush the base film of the wallpaper, but Xiaobian thinks it is better to varnish or varnish, but the varnish is not environmentally friendly, so that the wall is firm and the wallpaper will not fall off.
3, cutting wallpaper is the next thing we have to do, first of all we have to do is to measure the height of the wall, and then cut the length of the wallpaper, there are two cases, the flower wallpaper according to the height of the wall is cut 5 to 8 cm The length of the left and right, as the upper and lower trimming, the symmetry of the pattern should be considered for the flower wallpaper, so the cutting length should be increased according to the actual situation, generally 8 to 10 cm.
4. The next thing we have to do is to apply the glue and apply the wallpaper glue to the back of the cut wallpaper with a brush. Special attention is paid to the surrounding edges to ensure the construction quality. Painted wallpaper, glued to face folding for 5-10 minutes, be sure to pay attention, do not apply external force, this will avoid creases in the wallpaper, especially the cloth, so that the glue can be completely penetrated into the paper, you can post it. Brush a few sheets of wallpaper each time and post them in order.
5. After all the above is done, what we have to do is to leave the wallpaper construction. Usually, the first wallpaper is posted from the top to the bottom of the door or the corner of the corner, from the top to the bottom, from the inside to the outside. Gently scrape the wallpaper, squeeze out the bubbles and excess glue, and let the wallpaper flat against the wall.
6. In the end, the thing we have to do is to trim the edges and clean the excess wallpaper at the upper and lower ends. The edge of the knife should be sharp to avoid the burrs. When cutting some wall coverings, it is best to use a Japanese imported blade with a price of 1.5 yuan. Then use a sponge dampened with water to completely wipe the glue remaining on the surface of the wallpaper to avoid yellowing of the wallpaper. If the wallpaper is dry after drying, if the surface is found to have air bubbles, use a knife to cut the injected glue and flatten it to eliminate it.
After carefully reading the above articles, did you know what the wall coverings are, and we believe that after understanding these, we will make everyone more like to decorate the walls with wall coverings, if Also want to know, more home improvement information, please continue to pay attention to, decoration home network.
More related wonderful reading:
How to paste wall covering how to put on the wall cloth
Foam Mattress,Gel Mattress,Linenspa Mattress,Foam Mattress Topper
Jiangsu Sleeptight Household Technology Co., Ltd. , https://www.sleeptightoem.com