Wireless mouse I believe many of my friends are not unfamiliar to the general notebook users the pursuit of simplicity, prefer to use a wireless mouse. The biggest highlight is that it does not need to occupy the U interface of the computer, and there is no data cable tail, which can make the computer desktop more concise.
The wireless mouse's ability to receive signals determines the fluency of its use. Therefore, the wireless mouse needs to have high quality requirements in selection. It is recommended that you buy through a formal and reliable way when purchasing, like Klip The mall, which can ensure the direct supply of manufacturers, is a relatively reassuring choice. The following landlord will introduce the use of wireless mouse and laptop connection tutorial.
How to use wireless mouse for laptop? A wireless mouse generally has two components, one is a transceiver for receiving signals, and the other is a wireless mouse. The transceiver needs to be plugged into the USB port of the computer, and the wireless mouse needs to install the battery and turn on the mouse switch, then it can be used normally.
Here are the detailed method steps:
1. Unpacking
At present, most of the wireless mice are boxed and disposable plastic packaging. Here, I want to remind you that if the packaging is disposable plastic packaging, you must be careful to be scratched by the hard plastic during the unpacking process. Do n’t be lazy to use the tool or Must be used.
2. Locate the battery compartment
The battery compartment of most wireless mice is designed at the bottom of the mouse, pay attention to check whether there is a switch button of the battery compartment at the bottom of the mouse, if not, directly press down hard with your thumb first, and then push the battery cover back to open the battery cover .
3. Install the battery
A battery is included in the package of the wireless mouse. Locate the battery cover of the mouse and install the battery. Note that the positive and negative directions of the inserted battery are correct, and then close the battery cover. At present, the batteries equipped with mainstream wireless mice can generally be used for half a year to 1 year. It is recommended that users use more than half a year to buy spare batteries in advance, so as not to affect the use of the mouse due to the dead battery.
4. Connect the receiver to the computer
At present, most of the wireless mice sold in the market use 2.4GHz wireless technology. You can complete the pairing and use the mouse normally by inserting the corresponding receiver on the USB interface of the computer. For some wireless mice that do well in energy saving You need to turn on the power switch of the mouse after inserting the receiver to use it. The power switch of the wireless mouse depends on the specific product, and it can be found on the bottom or side of the wireless mouse.
The above is a tutorial for using a wireless mouse on a laptop. Generally, as long as the receiver is directly plugged into the USB port of the computer, the power switch of the mouse is turned on (some mice do not have a switch), then the computer will automatically detect the new hardware and install it automatically . At this time, you can move the mouse to see if the cursor on the computer is movable. If the movement indicates that the mouse can now be used normally.
Commercial Furniture,Commercial Office Furniture,Commercial Desk,Commercial Lounge Furniture
NINGBO CHEN WEI SUPPLY CHAIN MANAGEMENT CO.,LTD , https://www.chenweifurniture.com