Painting and waxing are important parts of the mahogany furniture production process. However, many consumers have been wondering: Is mahogany furniture lacquered or waxed? Today, furniture fans explain the craftsmanship of lacquering and waxing of mahogany furniture for everyone to distinguish.
Painted
For a long time, mahogany furniture has the saying that "the south is painted with wax." Lacquering, as a traditional handicraft, has a long history in China. What is commonly referred to as "painting" refers to the traditional lacquer (also known as enamel, enamel) in mahogany furniture. The lacquering process refers to the use of natural green environmentally-friendly material lacquer as the main raw material for mahogany furniture. After repeated surface treatments such as lacquering and coloring, the mahogany furniture has clear, smooth and smooth wood grain. The color is clear and bright, and the hand feels comfortable. It not only improves the appreciation space of mahogany furniture, but also enhances its artistic appreciation value.
Painting can effectively delay the life of furniture. Lacquering is more common in the South. One southern air has a high humidity, and it is often necessary to protect the furniture by painting. The second can be used for decorative effects. The lacquer is made of natural lacquer as the main raw material. It has strong adhesion, acid and alkali resistance and corrosion resistance. It has good protection for furniture and can produce good decorative effect. This can be from a large number of unearthed cultural relics. Supported. Especially in the south, due to the relatively humid climate, in order to prevent moisture, many furniture surfaces are covered with a thin layer of lacquer, which greatly prolongs the life of mahogany furniture.
The lacquer is more permeable. The lacquer will show the texture and pores of the mahogany wood more realistically, showing the natural beauty of the material. Painted mahogany furniture must be taken to the paint room. The requirements of the paint room are very high, both temperature and humidity. Because the paint is easy to dry under such conditions. After the furniture is dry, take it outside, polish it with fine sandpaper, remove the floating paint, rub a layer of paint, and then enter the paint room to dry. This is repeated 10-15 times. After repeated iterations to ensure that the paint penetrates well into the wood, not just the wooden surface.
The mahogany furniture needs to be polished before the lacquering. Since the surface of the furniture is covered with lacquer, the main purpose of polishing before lacquering is to make the surface of the wood flat rather than smooth, compared to waxing and pre-painting. It is easier to polish. After the surface of the furniture is smoothed and dusted, the paint can be evenly rubbed to achieve a smooth and bright effect. It should be pointed out that the ancient paint mainly refers to the large paint, and the modern one is the chemical paint. Since the chemical paint will harden or even fall off after a long time, the paint can be properly used with some citric acid in the future maintenance. Softening effect.
Further reading: mahogany furniture making process - painting
Waxing
The purpose of waxing of mahogany is especially the early maintenance of mahogany, which forms a protective film to isolate the mahogany and dirt, avoiding the direct contact of the dirt with the mahogany and even infiltrating into the interior of the paint, which makes it difficult to clean in the future. Waxing can improve the brightness of the mahogany, maintain the elasticity of the mahogany, and the effect is better than once. After a long time of redwood, the surface will be worn or even blackened. Waxing is a regular maintenance method to protect the mahogany, while increasing the brightness and beauty of the mahogany. What is commonly referred to as "waxing" mainly refers to hot wax. Hot wax is another traditional surface finishing process for mahogany furniture. Very early on, people applied the wax to the surface of the furniture, baked it with a torch, and burned the wax on the surface of the furniture, so it was called "hot wax." Later, with a blowtorch, baking wax is convenient. Later, with a hair dryer, until now, this is still the most commonly used method of melting wax in the North.
The waxed mahogany furniture is more natural. After the waxing, the furniture is touched by human hands. It is oxidized by the air. The color changes quickly. The color is natural and translucent, and it can reflect the true color of the mahogany. It feels like blending with nature, and mahogany furniture is also like With life.
Most of the northern mahogany furniture uses the waxing process. Whether the wax is properly waxed often reflects the level of the enterprise's craftsmanship. Before ironing the wax, it is necessary to polish the furniture carefully. Generally, it is sanded many times with a variety of different specifications of sandpaper. After polishing, the waxing starts. First melt the paraffin a little bit, so that it covers the surface of the furniture as evenly as possible, and then rush down the wood grain. When you are in a hurry, pay special attention to the direction. You can't rush to hang it horizontally, otherwise the wax will be uneven and unsightly, and it will not be very good. A really good hot wax, there is a process, that is, use a small scraper to scrape the details of the furniture evenly, such as furniture edges, corners, carvings, gaps, etc. should be scraped in place.
Is the mahogany furniture lacquered or waxed? Through the above comparison, we can see that whether it is "painting" or "waxing", it is the maintenance of furniture, no matter who is good or who is bad, the most critical In the operation, we must strictly follow the process flow, study the knowledge, pay attention to the details, and must not "steal the work" in order to save costs, because mahogany furniture is not only used, but also collectibles, the process requirements should be refined. Waxing requires a higher drying requirement for the furniture. If the drying is not good, the furniture will be deformed and cracked, and the furniture is not well protected as above. The waxed furniture should be carefully watched during use. Once there is hot, hot water or the container is placed on the hot waxed mahogany furniture, it is easy to get a white circle, and it is not as good as the paint furniture. However, the lacquering process will color the furniture and provide some space for some counterfeiters. And in terms of personal preferences, some people may think that the color of the painted furniture is rigid, it is better to wax the furniture and the color is natural. Therefore, consumers can refer to the above introduction and choose freely according to their own preferences.
A coffee table is a low table designed to be placed in a sitting area for convenient support of beverages, remote controls, magazines, books (especially large, illustrated coffee table books), decorative objects, and other small items.
Most coffee tables are made of wood (though faux wood tables are increasingly common) or glass and metal, typically, stainless steel or aluminum and may incorporate cabinets or drawers.
Coffee tables were thought to initially be constructed in Renaissance England.
Origins
Japanese style coffee table.
In Europe, the first tables specifically designed as and called coffee tables, appear to have been made in Britain during the late Victorian era.
Couch and coffee table in a hotel room
According to the listing in Victorian Furniture by R. W. Symonds & B. B. Whineray and also in The Country Life Book of English Furniture by Edward T. Joy, a table designed by E. W. Godwin in 1868 and made in large numbers by William Watt, and Collinson and Lock, is a coffee table. If this is correct it may be one of the earliest made in Europe. Other sources, however, list it only as "table" so this can not be stated categorically. Far from being a low table, this table was about twenty-seven inches high.[citation needed]
Later coffee tables were designed as low tables and this idea may have come from the Ottoman Empire, based on the tables in use in tea gardens. However, as the Anglo-Japanese style was popular in Britain throughout the 1870s and 1880s and low tables were common in Japan, this seems to be an equally likely source for the concept of a long low table.
From the late 19th century onwards, many coffee tables were subsequently made in earlier styles due to the popularity of revivalism, so it is quite possible to find Louis XVI style coffee tables or Georgian style coffee tables, but there seems to be no evidence of a table actually made as a coffee table before this time. Joseph Aronson writing in 1938 defines a coffee table as a, "Low wide table now used before a sofa or couch. There is no historical precedent...," suggesting that coffee tables were a late development in the history of furniture. With the increasing availability of television sets from the 1950s onwards coffee tables really came into their own since they are low enough, even with cups and glasses on them, not to obstruct the view of the TV.[citation needed]
Coffee Table,Coffee Table Sets,Modern Coffee Table,Adjustable Coffee Table,Corner Table,Solid Wood Table,Wooden Coffee Table,Wood Coffee Tables
Jinan Tri-Tiger Technology Development Co., Ltd , https://www.tritigerwooden.com