Water Playground General Specifications ï‚· 1 Scope
This standard specifies the technical requirements, test methods and inspection rules for aquatic amusement facilities.
This standard applies to all types of water slides (hereinafter referred to as slides), recreational pools, cruise ships and other types of water amusement facilities.
This standard does not apply to boats with more than 6 passengers and special personnel for sightseeing and transportation. This standard does not apply to sports equipment such as rowing boats and windsurfing boards.
This standard does not apply to racing pools.
2 Reference standards
The provisions contained in the following standards are incorporated into this standard and constitute the provisions of this standard. At the time of publication, the editions indicated were valid. All standards will be revised and all parties using this standard should explore the possibility of using the latest version of the following standards.
GB/T153-1995 Coniferous sawn timber
GB/T983-1995 stainless steel electrode
GB/T985—1988 Basic forms and dimensions of weld bead for gas welding, manual arc welding and gas shielded welding
GB/T986—1988 Basic Types and Dimensions of Submerged Arc Weld Bead Grooves
GB/T998—1982 Basic Test Method for Low-Voltage Electrical Apparatus
GB/T 1032-1985 Three-phase asynchronous motor test method
GB/T 1040—1992 Test method for tensile properties of plastics
GB/T 1048-1990 nominal pressure of pipeline components
GB/T 1447-1982 Test method for tensile properties of glass fiber reinforced plastics GB/T 1449-1983 Test method for bending properties of glass fiber reinforced plastics
GB/T 1451—1983 Test method for impact toughness of simply supported beams of glass fiber reinforced plastics
GB/T 1462-1988 Test method for water absorption of fiber-reinforced plastics (neq ISO 62:1980)
GB/T 2411-1980 Plastic Shore Hardness Test Method (eqv ISO 868:1978)
GB/T 2577-1989 Test method for glass fiber reinforced plastic resin content
GB/T 2681—1981 Wire colors in electrical assemblies
GB/T 2828-1987 Batch inspection sampling procedures and sampling tables (applicable to continuous batch inspections)
GB 3096—1993 Urban area environmental noise standard
GB/T 4162-1991 Wrought-rolled steel bar ultrasonic flaw detection method
GB/T 5117—1995 carbon steel electrode
GB/T 5118-1995 low alloy steel electrode
GB/T 7403.1-1996 lead-acid batteries for traction (neq IEC 254-1:1983)
GB 8408—2000 amusement machine and amusement facility safety
GB/T 9341-1988 Plastics bending test method
GB 9667—1996 Sanitary Standards for Public Places
GB 50231—1998 Specification for construction and acceptance of mechanical equipment installation engineering
GB J65-1983 Grounding Design Specification for Industrial and Civil Power Devices
JB 4730—1994 Nondestructive testing of pressure vessels
JB/T 5000.12—1998 general technical conditions for heavy machinery
3 Technical requirements
3.1 Basic requirements
3.1.1 The design, manufacture, construction, installation and use of water amusement facilities shall comply with the relevant provisions of this standard and GB 8408.
3.1.2 Water amusement facilities must be operating normally without any abnormalities.
3.1.3 The rated load is calculated as 70kg per person.
3.1.4 Parts that are frequently in contact with water should be protected against rust or by rust prevention.
3.1.5 Important parts and their connections should be solid and reliable.
3.1.6 The material of important parts must have a factory certificate, otherwise it should be sampled and tested.
3.1.7 All kinds of yachts, bumper boats and speedboats must be restricted to running in different waters and must not be mixed together.
3.1.8 The standard electromechanical products should be selected reasonably and should have product certification; non-standard electromechanical products must be inspected by the quality inspection department before they can be used.
3.1.9 Water rides should be equipped with adequate life-saving personnel and life-saving equipment. And set up a high lifeguard whistle. Life-saving appliances should use products with inspection marks.
3.1.10 bolt and pin connection (a) When parts are bolted, measures should be taken to prevent loosening;
(b) When parts are connected by pins, measures must be taken to prevent them from falling off.
3.1.11 welded connection
(a) Welding rods for manual welding shall comply with the provisions of GB/T 5117, GB/T 5118 and GB/T 983;
(b) The basic form and dimensions of the welded joints are to comply with the provisions of GB/T985;
(c) Welds shall be free of defects such as missing welds, burn-throughs, cracks, porosity, slag inclusions, incomplete penetration, and severe undercuts (steel ships may not allow undercuts deeper than 0.5 mm). All welds and slag should be removed.
3.1.12 All exposed sharp edges, sharp corners, burrs and dangerous protrusions are not allowed where passengers may touch.
The company's Sports Equipment Co., Ltd. warm reminder: Caring for children's healthy growth, starting from paying attention to children's safety!
Clear crystal wine glass is use for living room.dining room.table glass,banquet ,wedding glass etc.
We have own profession designer and can make differnt shape glass for you.
For the packing,we can make buik pack.mail box,color box,PDQ,PVC box etc.
We have not only make tumbler glass cup can make stemless wine glass,glass cup,high ball glass.water glass,juice glass,wine glass,tea glass,beverage glass cup
Any product of interesting,pls let us know freely.
Red Wine Glass,White Wine Glass,Stemless Wine Glass,Stem Wine Glass,red wine glasses set
Xi'an ATO International Co., Ltd , https://www.xianato.com