Neat stacking of semi-finished products in screen printing

In the process of stacking semi-finished products, it is necessary to let the two sides of the paper fall down. Otherwise, the paper is bowed due to its own gravity, the two sides of the paper are upturned and not flat, and the paper is difficult to convey during printing, and the phenomenon of breakage often occurs. When the sheet is uneven, it can be leveled with cardboard. At the same time, the height of the sheet must be adjusted with the adjustment knob of the sheet separation mechanism so that the paper can be smoothly conveyed and the printing process can proceed smoothly.

The blade of the drying device has been damaged due to long-term use, and some places are not synchronized with the operation of the mainframe, often resulting in spurious prints on the paper frame. At this time, we should try to get rid of the disease quickly and immediately remove it from the bottom of the chaotic sheet. It is better not to make the ink film face to avoid stickiness or defective products. Therefore, only by attaching importance to all aspects affecting the quality of printing, can we produce beautiful printed matter, increase the yield, reduce the consumption and increase the benefit, and make the enterprise stand invincible in the market competition.

Reprinted from: China Washing & Dyeing Industry Information Center