Although custom furniture meets the individual needs, there are still many problems. Young people like to express their ideas and personalities, and custom furniture is a great way for young people to achieve. The acceptance of custom furniture also has certain requirements and skills, otherwise it will encounter some troubles in after-sales and use. In order to avoid these problems, acceptance is indispensable. The following focuses on several considerations for the acceptance of custom furniture.
First of all, the size should be seen when accepting custom furniture.
Furniture is not only beautiful, but more important is practical. Whether the size of the furniture is ergonomic and whether it meets the specified size determines whether the furniture is convenient or not.
Secondly, the process should be seen when accepting custom furniture.
The furniture is not fine, and it can be observed from the combined part to see the rationality and firmness of the connection point between each component of the furniture. For the overall structure of the furniture, each connection point, including the connection points between horizontal and vertical, must be tight, no gaps, and no looseness. The drawers and cabinet doors should be opened and closed flexibly and returned correctly. The periphery of the glass door should be polished and clean, flexible to open and close, no collapse, scratches, symmetry of the four corners, and the position of the buckle is positive.
Third, the appearance should be seen when accepting custom furniture.
Check the quality of the exterior of the decorated furniture and the quality of the exterior of the inspection package door and window. Mainly to see whether the surface paint film is smooth, bright, with or without quality defects such as falling, bubbles, wrinkles; also depends on whether the color difference of the veneer is large, whether the pattern is consistent, whether there are corrosion points, dead knots, broken parts, etc.; Whether the edge sealing treatment of wood-based panel parts is strict and straight, with or without degumming, whether the surface is smooth and flat, and there is no bump.
Fourth, the structure should be seen when accepting custom furniture.
Check if the structure of the furniture is reasonable and the frame is correct and firm. Gently push the furniture by hand. If there is a sway or a squeaking sound, the structure is not firm. To check the verticality of the furniture, also check its warpage.
Related reading: custom wardrobe board selection four major standards
Round Shape Tempered Glass Cover,Rectangle Tempered Glass Lid,Square Tempered Glass Lid,G Type Glass Lid
Hebei Bozheng Glasswork Co.,Ltd , https://www.bozhengglass.com