[ Chinese wardrobe net ] Renovation of the wardrobe embedded in the wall, depending on the situation of the loss of the renovation process. Here are some common loss scenarios and solutions for the embedded wall wardrobe. First: the original fire board uplift. In this case, the original fireproof board can be removed and the new fireproof board can be re-applied. Second: the original Polaroid board is uplifted. In this case, the process of first removing and then re-sticking is also taken. Third: original The splint surface is old. It can be repainted. This method is cheap but not effective; or it is very good to brush the white hand, but the price is slightly more expensive. Fourth: the original veneer is old. This situation Under the general, it can only be re-polished and painted with the same type of paint, but the effect is not very obvious.
Wooden furniture is not subject to regular maintenance and it is easy to lose its original luster. Dedusting furniture is the most basic nursing job. Use a soft cloth dipped in a spray (Billy beads) to dust the furniture along the texture of the wood, but do not use a dry cloth to avoid rubbing. Daily protection is also very important. Use a mat as much as possible under a hot plate to prevent spillage, staining or damage to the table. Try to avoid contact with corrosive liquids, alcohol, nail polish, and lacquer remover on the furniture surface. When solid wood furniture is used in a drier environment, manual humidification is required. Such as: regularly wipe the furniture with a soft cloth dampened with water. The furniture is waxed regularly every six months to one year. It is best to use a waxy wax to wax the furniture. Before waxing, the old wax should be wiped off with milder non-alkaline soapy water. When the furniture is scratched or repaired with dents, a simpler remedy is to use a cotton ball or a brush to apply a similar color of shoe polish to the surface of the furniture; if removing water from the surface of the furniture, apply a clean absorbent paper. Spread on the water, use a heated iron to press it on top. It can also be applied with salad oil and toothpaste. Afterwards, it can be dried and waxed. If the white mark is removed, the best way is to use a cloth with soot and lemon juice or Spread the salad oil mixture, dry and wax.
Bread Baking Pan,Bread Pan,Loaf Pan,Bread And Loaf Pans
Xiongyang Household Co., Ltd , https://www.xyutensil.com