The folding machine is a machine that folds a large number of sheets into a frame according to certain specifications. It is one of the main post-press equipment for book and newspaper processing, and has become one of the indispensable production equipment in the printing enterprise production process.
Do a good job of daily maintenance of the folding machine, which can make the machine run stably, improve work efficiency, extend the normal service life of the machine, and at the same time make the quality of the produced products stable. Therefore, the daily maintenance work of the folding machine must be done. it is good. The specific maintenance work is as follows:
First, the folding machine daily maintenance:
1. Clean the environment around the machine and the machine itself;
2. Check if the firmware is loose and wear, and if there is any abnormal sound, whether the electric eye travel switch is normal or not;
3. Folding knife guide rod, bakelite block plus one oil (30# engine oil about two drops);
4. Wipe the dust off each electric eye with a clean soft cloth and clean the surrounding paper dust.
Second, the folding machine weekly maintenance:
1. The front gauge and the paper gauge support the guide rod with a small amount of oil;
2. Fill the air pump grease nozzle with high temperature grease and clean the air filter inside the air pump.
Third, the folding machine monthly maintenance:
1. Add butter to each butter nozzle of the machine;
2. Filling the support and sliding parts for adjusting the pressure of the folding roller with oil;
3. Filling the camshaft transmission part chain wheel with oil;
4. Clean the dust on each fence board and adjust the common parts of the fence to the best working function state;
5. Clean or check whether the working state of the solenoid valve is normal;
6. After turning off the power of the folding machine for 10 minutes, clean the dust and paper scraps of the electric box. Visually, there are abnormal phenomena such as looseness and falling off of the wireless head (if there are conditions, please contact the electrician for inspection);
7. Adjust the pulley or check the tension (tightness) of all the paper feeding belts to the appropriate position;
8. Clean the internal mopping machine inside the machine and the surrounding ground to keep the inside of the machine and the ground without excess grease to prevent electrical fires;
9. Check if the air pump motor is hot, please check the circuit for normal and effective;
Note: The maintenance work of the folding machine is required to ensure that the power is turned off.
A wooden box is a container made of wood for storage or as a shipping container.
Construction may include several types of wood; lumber (timber), plywood, engineered woods, etc. For some purposes, decorative woods are used.
Boxes and crates are not the same. If the sheathing of the container (plywood, lumber, etc.) can be removed, and a framed structure will remain standing, the container would likely be termed a crate. If removal of the sheathing resulted in there being no way of fastening the lumber around the edges of the container, the container would likely be termed a wooden box.
The strength of a wooden box is rated based on the weight it can carry before the cap (top, ends, and sides) is installed. "Skids" or thick bottom runners, are sometimes specified to allow forklift trucks access for lifting.
Performance is strongly influenced by the specific design, type of wood, type of fasteners (nails, etc.), workmanship, etc.
Some boxes have handles, hand holes, or hand holds.
Wood Box,Solid Wood Box,Wood Gift Box,Custom Wooden Box,Unfinished Wood Box,Wood Storage Box
Jinan Tri-Tiger Technology Development Co., Ltd , https://www.tritigercn.com