Which rope-breaking method should be used when ensuring measures

When a climber accidentally falls, the technique of pinning it out so that it does not continue to fall is called a surety measure, ensuring that the method used to lead the team is different from the method used to secure the second climber. In addition, the self-rescue measures to avoid falling from the rocks and the connection guarantees set by the team leader to minimize the distance to fall are all characteristic and sure methods.

Make sure that you only need to use double knots and tuck knots. However, it requires more organized climbing ropes, so it must be learned.

Make a support point

Ensure that the support points for the climber or rescue measures can be made using things such as climbing nails, trunks, or screws. The most common method of making is to tie the ropes to the supports using a tack. If the support point comes from more than two places, the rope must be made so that each support point is equally stressed.

Self-rescue measures

Members must take self-rescue measures to ensure work or summit. The method is to use a double knot to tie the climbing rope of the safety harness on the rock climbing iron ring that sets the support point.

Precautions

Pass the climbing rope through the eight-character ring and fasten it with the hook and loop of the waist, and use your own body as a support point to send the climbing rope. When accidentally falling, the eight-character ring will play a role in containment, as long as the clenched rope can prevent further falling. Make sure that the ropes around the support points are around the waist.

There are two ways to set a climbing rope through the eight-character ring, but the method of A can make the climbing rope more smoothly.

Subsequent Member Assurance Measures

Subsequent members' measures of protection are to make a support point on the remaining climbing nails, trunks or screws, and then use the above A or B method to pass the climbing rope through the eight-character ring.