How to install indoor ceiling lamps to bring safety to future life

When we are lighting the interior of the room, we usually use the lamps to bring light to our interior. Among the many lamps, ceiling lamps can be said to be among them and are inexpensive. However, when installing the ceiling lamp, we must also consider the safety and steps during installation to ensure that we can bring peace of mind to our future life. What should we pay attention to when installing the ceiling lamp ? What are the installation requirements for ceiling lamps?

First, the ceiling lamp installation - pre-buried

室内吸顶灯如何安装

When installing a ceiling lamp in a masonry structure, use pre-embedded bolts, or use expansion bolts, nylon plugs or plastic plugs; do not use wooden wedges. And the bearing capacity of the above fixing member should match the weight of the ceiling lamp. To ensure that the ceiling lamp is fixed, reliable and can extend its service life.

Second, the ceiling lamp installation - fixed

The number of fixed lampholder bolts shall not be less than the number of fixing holes on the base of the lamp, and the diameter of the bolts shall be matched with the hole diameter; the fixtures with no fixed mounting holes on the base shall be used for fixing bolts or screws of not less than 2 And the center of gravity of the luminaire should match the center of gravity of the bolt or screw; only when the diameter of the insulating table is 75mm or less, it can be fixed by one bolt or screw.

如何安装吸顶灯

Third, ceiling lamp installation - lamps

Ceiling lights can not be directly installed on flammable objects. Some households use the three plywood after painting to lining the back of the ceiling lamp. In fact, this is very dangerous and must be insulated; if the high temperature part of the lamp is close to combustibles Also, take insulation or heat dissipation measures.

Fourth, ceiling lamp installation - inspection

吸顶灯安装

The cross section of the wire core leading to each luminaire, the copper core cord is not less than 0.4 mm, and the copper core is not less than 0.5 mm, otherwise the lead must be replaced. The connection between the wire and the lamp cap, the parallel wire connection between the lamp caps should be firm, and the electrical contact should be good, so as to avoid sparking between the wire and the terminal terminal due to poor contact, and danger occurs.

The above is about the installation of indoor ceiling lights, I hope to help everyone! Qi installed network, China's well-known large-scale decoration platform, decoration leading brand. If you want to make a new design, you are advised to apply for the free design service of the net, and help you plan a reasonable space layout and beautiful design through the professional designer's on-site measurement room.

>>Click here to get a professional designer free room design

Cup Mug

Cup Mug,Coffee Mugs,Ceramic Coffee Cup,Custom Coffee Cups

Chic Products (China) Co., Ltd. , https://www.chic-gifts.com

Posted on