Self-adhesive wallpaper how to stick self-adhesive wallpaper

There are a lot of decorations in our houses. There are many ways to decorate the walls. So we have to choose the style of our own houses. Nowadays, the more common ones are the paving of wallpapers. If you stick them yourself, we must first understand them. Now, how do you stick the self-adhesive wallpaper? What are the main points of self-adhesive wallpaper? Let's introduce it to you by the small series of the decoration home network.


自粘墙纸怎么贴


First, how to stick self-adhesive wallpaper


1. Before cleaning the wallpaper, use a brush to clean the dust on the wall. For the wall with a cavity, repair it to a flat surface, and then use a scraper to slowly level the wall. The wallpaper thus laid out is evener.


2. Using a round ruler, the height of the wall is good. I use the vertical paste method to paste from top to bottom. Measure the length and start cutting. When cutting, it should be 2-3 cm more than the actual length, so that some space is left for the corner trimming. When cutting, measure the size and cut it with a ruler and a Blade.


3. It is best to work with two people, one is responsible for pressing the edge of the wallpaper by hand, and one person is responsible for posting. People who hold the wallpaper with their hands should also pay attention to see if the angle is neat, don't stick it.


4. When attaching, stick to the wall little by little, stick it with a hand and wipe the place where it is pasted. Do not leave bubbles in it. Need a little patience, slowly paste, slowly catching bubbles, so it is very beautiful.


自粘墙纸怎么贴


Second, the main points of self-adhesive wallpaper


1. When the new wallpaper is attached, clean the wall and tear off the old wallpaper. As for the painted surface, it should be repaired first. Since the wallpaper is long, when the wallpaper glue is applied, the wallpaper is folded in an S shape while being spread, so as to save space. When you put wallpaper, you need to go from top to bottom, and the left and right directions must be the same, step by step.


2. The wallpaper of the non-flowers overlaps about 1-2 cm at the overlap of each long piece of wallpaper. As for the wallpaper of the flowers, it must be adjusted according to the color of the flowers. When the wallpaper is touched, there is a switch cover on the wall: the wall is still flat and the whole piece is flat. After the whole is finished, cut it with the utility knife along the outer cover of the switch cover. If the wall is very uneven, it is recommended to add it before the sticker. Apply a layer of stabilizer, but it is not absolutely necessary.


3. If the wallpaper is connected by the printed wallpaper, find the consistent position of the pattern at the junction of the two wallpapers, and the overlap is about 12cm wide. After the whole wallpaper is aligned, use the scraper to resist, and then cut the overlapping part with the blade. Just fine. When you affix the wallpaper, pay attention to sticking from top to bottom. If you find that the floating surface is uneven, you can use a towel to wet it, and then re-level with a scraper.


There are a lot of families who choose wallpaper to decorate the wall. How do you stick to the self-adhesive wallpaper and what are the precautions? Look at the introduction of the above series. Everyone knows about it, then if you want to know more For decoration information, please continue to pay attention to the decoration home Internet cafe.


More related wonderful reading:

Self-adhesive wallpaper how to stick self-adhesive wallpaper notes


HT411 Brush Cutter Parts

Ht411 Brush Cutter Parts,Brush Cutter Chain Head,Brush Cutter Carburetor Parts,Push Mower Brush Cutter

Shaoxing Haotuo Machinery CO., LTD. , https://www.haotuochinatools.com

Posted on