Standard requirements for material size specifications of each part of the hardcover case
â‘ Specification of book case cardboard
The length of the bookcase cardboard: the length of the book block plus two floating mouth widths (floating mouth width: 3 ± 0.5mm for format 32 and below, 3.5 ± 0.5mm for format 16 and 4 ± 0.5mm for format 8 and above). Bookcase cardboard width: book block width minus 3-11mm.
â‘¡Medium-diameter cardboard specificationsMedium-diameter cardboard length: book block length plus two floats wide. Middle-diameter cardboard width: book back arc length (round back) or book back width plus two cardboard thickness and 1mm glue layer (square back false ridge).
③ Specification of the cover: The length of the whole surface: the length of the cardboard plus the width of the two edges (each edge is 15 ± 1 mm). Overall width: two cardboard widths plus one middle-diameter paper width and two middle slit widths, plus two wrapping widths. Mid-seam width: round back is groove width (6-7 mm) plus one cardboard thickness, square back false ridge, groove width (6-7 mm) plus two cardboard thicknesses. Middle diameter width: middle diameter cardboard width plus two middle slit widths.
â‘£ Cover paper specifications
The length of the paper in the cover: the length of the cardboard plus two cardboard thicknesses minus the width of the two wrapping edges. Inside paper width: cardboard width plus one cardboard thickness and minus one wrapping width.
(2) When cutting hard-covered bookcase cardboard and medium-diameter cardboard, you must cut inside and not outside.
(3) The size of the cut cardboard is accurate and not skewed, with a tolerance of ± 1mm.
(4) The correct adhesive is used (use animal glue or polyvinyl alcohol PVA), the viscosity is appropriate, and the application is thin and even, without overflowing.
(5) The group shells are not skewed correctly, and the upper and lower sides are consistent in parallel, with a tolerance of ± 1mm. The tolerance of the middle diameter is ± 1mm, and the width of the bookcase is ± 2mm.
(6) When cladding (manually), wrap the head and feet first, and then wrap the two sides, and wrap tightly, without empty sleeves, wrinkles, or bubbles.
(7) The back of the cladding is stacked on the opposite side. After flattening, it is naturally dried. Drying and exposure are strictly prohibited.
Hot stamping quality standard requirements
(1) It is correct to use hot stamping (zinc plate can be used under 6000 copies, and copper plate can be used for more than 6000 copies); hot stamping should be modified when the upper plate is printed, and the back plate should be polished before sticking to the plate to ensure that the sticking plate is firm and free of slippage. phenomenon.
(2) The temperature and time of hot stamping are correctly selected according to the hot substance.
(3) Appropriate pressure, no paste version, no flower version, clear graphics, sharp edges and gloss.
(4) The hot stamping specifications are accurate, and the upper and lower tolerances of the middle waist graphic are not more than 2mm; the left and right tolerances are: 1 / 10mm for the thickness of the book block below 25mm, and 2.5mm for the above 25mm; cover specifications: skew and error no more than 1.5mm .
From dawn to dusk, the Patio Umbrella blocks the sun's glare as it moves across the sky. Crafted from the finest, highest-performing materials, the umbrella goes up easily with a pull of the cord and is held aloft by a sturdy cast-aluminum hub and pin system, and ribs. The canopy is tailored of premium, solution-dyed acrylic chosen for its extreme resistance to fading, staining, mildew, and mold. Available with an octagonal or square canopy, the umbrella performs beautifully in commercial settings or at your private residence with different marble or water base, or others design base for your selection.
Patio Umbrella contain:
side post square or round patio umbrella
central pole round or square patio umbrella
Single layer or double roof patio umbrella
Aluminum hanging umbrella
If you have any questions, please contact with us directly. Patio Umbrella are produced by Golden Eagle Outdoor Furniture With High Quality and Good Appearance. Welcome you can visit our Factory.For any inquiry,Please send mail directly to us.
Patio Umbrella,Patio Sun Umbrella,Outdoor Patio Umbrella,Garden Patio Umbrella,Garden Umbrella
Golden Eagle Outdoor Furniture Co., LTD. , https://www.geoutdoor.com