Reasons: The viscosity of coating oil is too small, the coating is too thin, the coating is uneven, the surface of the tinplate is not smooth, and the coated anilox roller is too thin (the oil supply is too small), which will result in poor glossiness and insufficient brightness of printed products. .
Solution: (1) Appropriately increase the viscosity of the varnish, increase the coating amount, and add as little diluent as possible; (2) Adjust the coating mechanism so that the coating is uniform, or precoat the primer on the tinplate, To increase the amount of coating; (3) on the polishing of the oil; replace the coating of oil, cleaning the coating machine to avoid mixing different coatings.
What are the functions of face powder?
1. Make up is lasting. This is its most basic function, and it is also the most recognized and familiar function, because if you do not fix makeup, it is easy to spend makeup, and will also take off makeup. With powder powder, these problems will be solved.
2. Concealer. Loose powder also has a concealer effect, which can block the defects on the face that cannot be covered by liquid foundation or air cushion. It also has the function of hiding large pores. If there are prominent pores or blackheads, it can be solved by powder dispersion.
3. Absorb oil and brighten skin. The powder has a strong adsorption effect on oil. Whether it is applied on the face or hair, it can ensure the dryness of the skin and hair, without worrying about too bright oil. And its brightening effect on skin color is obvious.
Face Powder,Makeup Setting Powder,Loose Setting Powder
Suzhou Yimeijia368 Biological Technology Co.,Ltd. , https://www.yimeijiabeauty.com