When ordering cabinets, you have to ask nine questions:
One must ask about the thickness of the cabinet board
At present, there are 16 mm, 18 mm and other thickness plates on the market. The service life of cabinets made of 18 mm thick plates can be more than doubled to ensure that the door panels are not deformed and the countertops are not cracked. When consumers look at the samples, they must carefully understand the composition of the materials and be aware of them.
Second, ask if it is a separate cabinet.
The entire set of cabinets will affect the fastness, so consumers should ask when purchasing the whole cabinet, the service life and stability of the two are two to three times different, and the cost difference is 5%. Consumers can be identified by packaging and installed cabinets. If separate cabinets are assembled, each cabinet should have a separate package; consumers can also observe it in front of the cabinet.
The cabinet with anti-mite silent edge sealing can alleviate the impact force when the door is closed, eliminate the noise and prevent the insects from entering, and the cost of the anti-smashing edge is 3%. Also check whether the countertop, the door panel, the box and the sealing strip, and the anti-collision strip are processed by the machine film, whether it is pressed on both sides. The sealing strip is not tightly closed, which may cause oil smoke, dust and insects to enter.
Third, ask about the composition of artificial stone.
The materials suitable for the kitchen countertops include fireproof panels, artificial stone, natural marble, granite, stainless steel, etc. Among them, the performance price of artificial stone countertops is the best. The cheap tabletop calcium carbonate is high in composition and easy to crack. At present, more used in the market is composite acrylic, pure acrylic and so on. The composite acrylic component is generally in the best ratio of about 20%.
Fourth, ask if the artificial stone is dust-free.
In the past, many manufacturers will carry out artificial stone grinding at the installation site, causing environmental pollution in the living room, which is unexpected for consumers. Some leading cabinet manufacturers are now aware of this. If the cabinet manufacturer you choose is dusty, you must choose to install the countertop before the floor and paint enter the site, otherwise you will have to spend money to do the second cleaning.
Fifth, ask if you can provide a test report.
Cabinets are also furniture products. The state has a clear text to produce a finished product test report and express the formaldehyde content. Some manufacturers can only provide raw material inspection reports, but the environmental protection of raw materials is not equal to the environmental protection of finished products. Only the qualified products can prove that their products are qualified. Therefore, the consumer can ask for the purchase at the time of purchase, or record the quality inspection report number presented by the merchant and call the quality inspection department to check the authenticity.
Six to ask how to assemble
Generally, small factories or hand-made on-site can only be connected by screw rivets or glue. The use of the latest third-generation box-and-rod structure plus fasteners and quick-release parts is more effective in ensuring the firmness and endurance of the box, and less use of glue, which is more environmentally friendly.
Seven to ask how to seal the back plate
In order to save costs, some manufacturers cut corners and cut only the single-sided seal on the back panel. The unseen side is bare. After the single-sided sealing, the back sheet is easy to be wet and moldy, and it is easy to release formaldehyde and cause pollution, so it must be double-sided sealed.
Eight to ask the sink cabinet aluminum foil installation method
Whether the sink cabinet is pressed once or glued when installed.
The sealing performance of one press is more perfect, water and moisture are not easy to penetrate, and the cabinet body is more effectively protected, and the service life of the cabinet is prolonged.
Nine to ask for warranty period
Do not only care about the price and style of the product, whether to provide quality after-sales service is the performance of the strength of the manufacturer. For example, the warranty period, some manufacturers are one year, some manufacturers are two years, and some are five years, consumers must ask the product warranty and other issues when ordering cabinets.
Ningbo Yinzhou Hengxi Winbate Household Product Manufacturer , https://www.winbate.com